ICS1028G-8GC-20GS is an industrial grade, Rack-mount, layer3, Managed Ethernet switch which supports 8 Gigabit Combo ports + 20-port Gigabit SFP. providing sufficient data for aggregation and core data exchange of the bandwidth; to provide high-capacity switching capabilities to support based on the three layers of ACL function. Perfect security control strategy and CPU protection policy to improve fault tolerance and ensure stable operation of the network and link load balancing.
ICS1028G-8GC-20GS not only supports rich Layer 2 software features such as ports, VLANs, multicast, QoS, and fast redundant rings, but also supports static and dynamic routing, multicast routing, and supports multiple management methods of Console, Web, and host computer network management software, can satisfied the requirement of various industrial applications such as Intelligent Transportation System, Security Surveillance, Industrial Automation, Smart Grid, Rail Transportation Industry, Safely City, and New Energy, etc.
ĐẶC TRƯNG
- Support 8 Gigabit Combo ports + 20-port Gigabit SFP;
- Comply with IEC61850-3 standard;
- Support RIP, OSPF, PIM Layer 3 Routing protocol;
- Support MW-Ring, MSTP, VRRP, EAPS redundancy network;
- Support Front and rear indicator lights design;
- Support firmware upgrade online;
- Support relay alarm output;
- Support indicator status display;
- Support Broadcast storm suppression;
- Support multiple management methods and network centralized management;
- Support dual AC/DC 220V power supply;
- Power supply input support anti-reverse protection and non-polarity;
- Support over Voltage, over current, EMC protection;
- Support wide operating temperature range from -40-85°C;
- 1U, 19-inch Rack-mount Installation;
THÔNG SỐ KỸ THUẬT
Specification | |
Product Name | 28-port Full Gigabit Rack-mount Managed layer3 Industrial Ethernet switch |
Product Model | ICS1028G-8GC-20GS |
Port Definition | 8 Gigabit Combo ports +20-port Gigabit SFP |
Software performance | |
Switch Function | Support VLAN, GVRP |
Support port speed limit | |
Support storm suppression | |
Support port aggregation | |
Support port flow control | |
Redundancy protocol | Support VRRP/EAPS |
Support MW-Ring and the recovery time<20ms | |
Support RSTP/MSTP and compatible with STP | |
Multicast Routing | Support IGMP snooping/ IGMP v1/v2/v3 |
Support GMRP | |
Support static multicast | |
Routing technology | Support RIPv1 / v2, RIPng, OSPFv1/v2 |
Support static routing protocol | |
Support PIM-SM, PIM-DM | |
Service quality management | Support ACL and L2-L7 data Filter |
Support SP/ WRR queuing | |
Management and maintenance | Support Console, Telnet, WEB management mode, RMON |
Support SNMPv1 / v2c | |
Support FTP, TFTP file transfer and software upgrade | |
Support power failure alarm, power alarm, port alarm, ring alarm | |
Support port mirroring, Syslog, LLDP, RTC, SNTPv4 | |
IP supports DHCP server/relay /client | |
Technical specifications | |
Ethernet Standard | IEEE802.3-10BaseT |
IEEE802.3u-100BaseTX/100Base-FX | |
IEEE802.3x-Flow Control | |
IEEE802.3z-1000BaseLX | |
IEEE802.3ab-1000BaseTX | |
IEEE802.1ab | |
Ethernet Standard | IEEE802.1D-Spanning Tree Protocol |
IEEE802.1w-Rapid Spanning Tree Protocol | |
IEEE802.1Q -VLAN Tagging | |
IEEE802.1s Multiple Spanning Tree Protocol | |
IEEE802.1p -Class of Service | |
IEEE802.1X-Port Based Network Access Control | |
GVRP/RIPv1/v2&OSPFv1/v2/v3/VRRP/DHCP/CLI/EAPS/Qos/LACP/LLDP/IGMP/PIM/SNMP/SNTP/SSH | |
Switch properties | |
Priority queue | 8 |
VLAN ID | 4096 |
IGMP Groups | 512 |
MAC table | 16k |
Switch Bandwidth | 56Gbps |
Route Table | 8k |
Switch Delay | <5μs |
Interface | |
Gigabit ports | Port numbers: 28 |
Connector: SFP for fiber port(LC, single or multi-mode), RJ45 for copper port | |
Baud rate: 1000Base-LX(fiber port), 10/100/1000M for copper port | |
Console port | RS232/RJ45 |
Terminal block for power input | 5.08mm terminal block |
Terminal block for relay alarm | 5.08mm terminal block,1A@24VDC |
Communication distance | |
Twisted-pair | 100m(CAT5/CAT5e cable) |
Multimode fiber | Gigabit multi-mode: 850nm, 550m |
Single mode fiber | Gigabit single mode: 1310nm, 20km |
LED indicator lights | |
Front panel LED | Port light: LINK/ACT; SPEED |
Running light: RUN | |
Power LED: PWR1, PWR2 | |
Alarm LED: Alarm | |
Rear panel LED | RJ45 LED: LINK/ACT; SPEED |
Fiber LED: LINK/ACT | |
Power Requirements | |
Power input | AC/DC220V(85-264VAC/110-370VDC) |
Full-load consumption | <32W |
Overload protection | Support |
Reverse protection | Support |
Redundancy protection | Support |
Working Environment | |
Operating Temperature | -40°C~85°C |
Storage temperature | -40°C~85°C |
Ambient Humidity | 5%~95%( non-condensing) |
Physical Characteristics | |
Shell | IP40 protection, aluminum alloy shell |
Installation | 19″ 1U rack mounted for front and rear outlet installation |
Dimension | 482.6 mm*44mm*315mm |
DOWNLOAD
Tham khảo thêm các sản phẩm khác của Công ty TNHH Công Nghệ và Viễn Thông Hải Phong chúng tôi
0 đánh giá cho ICS1028G-8GC-20GS Switch công nghiệp 8 cổng Combo Gigabit + 20 cổng SFP Gigabit