E1-MUX30 is 1U rack card type, which provides 30channel telephone outputs, Equipment electrical part for the whole digital circuits, machine reliability, stability, low power consumption, high integration, small size, easy installation and maintenance. Many customers are telecommunications operators E1 leased lines used in computer networking, this equipment can be rented at the E1 line opened a few road phone, you can make free calls between headquarters and branch offices of this.
ĐẶC TRƯNG
- Support 30 channel voice E1 PCM Mux (19 inch);
- Based on proprietary integrated circuits;
- Alarm status can be monitored on the end;
- E1 interface complies with G.703, all-digital clock recovery;
- Support FXO voice port FXS ports and ports, EM2 / 4 audio interface, FXO port and PBX docking port and the user is connected to FXS telephone;
- 30 channel voice access, support caller ID function and reverse polarity billing functions;
- Support Telephone Number mutual function of each site;
- E1 signal can be detected as a barrier to the end device is lost or shut E1;
- Provide two kinds of clock ways: E1 master clock, E1 line clock;
- Provides three kinds of loopback: E1 local loopback (ANA), the Ethernet interface to the remote loopback (DIG), command peer Ethernet interface to the local loop (REM);
- There are pseudo-random code test function (PATT), to facilitate the opening line, which can be when one of E1 BERT to use;
- E1 can support N * 64k (N = 1-32) rate, that rate is adjustable from 64K-2048K;
- Multiple power mode options: AC220V, DC-48V / DC24V, etc;
THÔNG SỐ KỸ THUẬT
| FXS Phone Interface | |
| Ring voltage | 75V |
| Ring frequency | 25HZ |
| Two-line Impedance | 600 Ohm (pick up) |
| Return loss | 40 dB |
| FXO Switch Interface | |
| Ring detect voltage | 35V |
| Ring detection frequency | 17HZ-60HZ |
| Two-line Impedance | 600m |
| Return loss | 40 dB |
| E1 Interface | |
| Interface Standard | comply with protocol G.703; |
| Interface Rate | N*64Kbps±50ppm |
| Interface Code | HDB3; |
| E1 Impedance | 75Ω (unbalance), 120Ω (balance); |
| Jitter tolerance | In accord with protocol G.742 and G.823 |
| Allowed Attenuation | 0~6dBm |
| 2/4 wire Audio Interface | |
| AD gain | 0db |
| DA gain | -3.5dB |
| line Impedance | 600 Ohm (pick up) |
| Return loss | 20 db |
| Other | |
| Power supply | AC180V ~ 260V; DC-48V; DC +24V |
| Power consumption | ≤10W |
| Dimension | 485 mm(W)×200mm(D)×45mm(H),19inch |
| Weight | 1Kg |
| Operating temperature | -10°C ~ 50°C |
| Storage temperature | -40°C ~ 80°C |
| Humidity | 5% ~ 95% (no condensation) |
| Warranty | 3years |
Products in the same series
| Model | Description |
| E1-MUX04 | 4 Voice POTS over E1,voice support FXS or FXO, power AC220V or DC48V |
| E1-MUX08 | 8 Voice POTS over E1,voice support FXS or FXO, power AC220V or DC48V |
| E1-MUX16 | 16 Voice POTS over E1,voice support FXS or FXO, power AC220V or DC48V |
| E1-MUX30 | 30 Voice POTS over E1,voice support FXS or FXO, power AC220V or DC48V |
Download
Tham khảo thêm các sản phẩm khác của Công ty TNHH Công Nghệ và Viễn Thông Hải Phong chúng tôi
Thêm một bình luận
Sản phẩm tương tự
SDH/MSTP nhỏ gọn
0 ₫
Model: SDH-8E1-4ETH
- 19” rack mountable, 1U height compact size
- System supports point-to-point, chain and ring network applications
- Gigabit Ethernet to STM-1 conversion, data rate up to 63 x VC12
- STM1 / STM-4 and n x E1 co-working simultaneously as network uplinks
- System supports 2 x STM-1, or 2 x STM-4 optical ports as ring protection
- Ethernet supports 4 x GE electrical ports or 3 x GE electrical ports plus 1 x GE optical port
- Order-wire channel for point-to-point and point-to-multipoint voice communication
- Sophisticate configurable system protection with SNCP network protection and 1+1 interface protection
- In-band management channel for remote control and system management
- Two expansion slots for E1 or various data or voice modules
- Alarm relay is provided for external alarm facility connection
- Remote firmware and software upgrade is available
- Redundancy power supply is supported with any combination of the power supply unit
Bộ ghép kênh quang PDH 16E1+ 4ETH được quản lý
0 ₫
Model: HPOM-16E1-4ETH
- Provides 16*E1 +4-port 100M Ethernnet over the fiber;
- Support 1-port Fiber or 1+1 Fiber back up;
- Provide 4*100 Mbit/s Ethernet channels, Ethernet speed can be set for each port on based on any multiples of n*32 Kbit/s;
- Provides one RS232 channel for option;
- Provide one hotline channel for option (order wire);
- Speed of optical port is 155Mbps, transmission range can reach 20, 40, 60, 80,100,120Km;
- E1 interface code is HDB3; E1 vibration characteristic conforms to ITU-T G.703、G.823 and G.742;
- Ethernet port supports full/half duplex, 10M/100M auto-adaptable, throughput is full duplex 100 Mbit/s;
- Ethernet port supports dot1Q VLAN setting possibility and port based VLAN;
- Layer2 intelligent switch possibilities for 4*Ethernet ports;
- Ethernet packet size supports 1916 byte and 4 Ethernet port could be set separately, jumbo frames are supported;
- Simultaneous 16E1 & 100 Mbit/s full duplex operation;
- LED indicators for alarm function and can monitor remote device status;
- Support DIP switch management;
- Supports E1 local and remote loopback for installation;
- Broadcast Storm Protection, Port monitoring;
- Current alarm and alarm history database;
- GUI based RS232 NMS manager for easy and convenient monitoring and management;
- Support DC48V and AC 220V power supply;
- Support -5-65°C wide operating temperature range;
- Warranty:3years
Bộ ghép kênh quang 8E1+ 4ETH PDH được quản lý
0 ₫
Model: HPOM-8E1-4ETH
- Provides 8*E1 +4-port 100M Ethernnet over the fiber;
- Support 1-port Fiber or 1+1 Fiber back up;
- Provide 4*100 Mbit/s Ethernet channels, Ethernet speed can be set for each port on based on any multiples of n*32 Kbit/s;
- Provides one RS232 channel for option;
- Provide one hotline channel for option (order wire);
- Speed of optical port is 155Mbps, transmission range can reach 20, 40, 60, 80,100,120Km;
- E1 interface code is HDB3; E1 vibration characteristic conforms to ITU-T G.703、G.823 and G.742;
- Ethernet port supports full/half duplex, 10M/100M auto-adaptable, throughput is full duplex 100 Mbit/s;
- Ethernet port supports dot1Q VLAN setting possibility and port based VLAN;
- Layer2 intelligent switch possibilities for 4*Ethernet ports;
- Ethernet packet size supports 1916 byte and 4 Ethernet port could be set separately, jumbo frames are supported;
- Simultaneous 8 E1 & 100 Mbit/s full duplex operation;
- LED indicators for alarm function and can monitor remote device status;
- Support DIP switch management;
- Supports E1 local and remote loopback for installation;
- Broadcast Storm Protection, Port monitoring;
- Current alarm and alarm history database;
- GUI based RS232 NMS manager for easy and convenient monitoring and management;
- Support DC48V and AC 220V power supply;
- Support -5-65°C wide operating temperature range;
- Warranty:3years
Bộ ghép kênh quang 4E1+ 4ETH PDH được quản lý
0 ₫
Model: HPOM-4E1-4ETH
- Provides 4 *E1 G.703 transparent transmission over the fiber;
- Support 1-port Fiber or 1+1 Fiber back up;
- Provide 4*100 Mbit/s Ethernet channels, Ethernet speed can be set for each port on based on any multiples of n*32 Kbit/s;
- Provides one RS232 channel for option;
- Provide one hotline channel for option (order wire);
- Speed of optical port is 155Mbps, transmission range can reach 20, 40, 60, 80,100,120Km;
- E1 interface code is HDB3; E1 vibration characteristic conforms to ITU-T G.703、G.823 and G.742;
- Ethernet port supports full/half duplex, 10M/100M auto-adaptable, throughput is full duplex 100 Mbit/s;
- Ethernet port supports dot1Q VLAN setting possibility and port based VLAN;
- Layer2 intelligent switch possibilities for 4*Ethernet ports;
- Ethernet packet size supports 1916 byte and 4 Ethernet port could be set separately, jumbo frames are supported;
- Simultaneous 4 E1 & 100 Mbit/s full duplex operation;
- LED indicators for alarm function and can monitor remote device status;
- Support DIP switch management;
- Supports E1 local and remote loopback for installation;
- Broadcast Storm Protection, Port monitoring;
- Current alarm and alarm history database;
- GUI based RS232 NMS manager for easy and convenient monitoring and management;
- Support DC48V and AC 220V power supply;
- Support -5-65°C wide operating temperature range;
- Warranty:3years
Bộ chuyển đổi Ethernet 16E1 sang 4 với Quản lý VLAN và GUI
0 ₫
Model: HPC-16E1-4ETH
- Support GFP-F encapsulation recommendation G.7041;
- Support Virtual concatenation(VCAT) and Link Capacity Adjustment
- Scheme (LCAS) recommendation G.7042;
- Support Ethernet to n*E1 mapping recommendation G.7043;
- Support Ethernet to single E1 mapping recommendation G.8040;
- Bandwidth is increased without damaging the Ethernet data;
- E1s in the local and remote sides can be arranged arbitrarily, such as: the remote E1 port 1 can communicate with local E1 port;
- Supports bandwidth unbalanced usage – when some E1s cannot work properly (i.e. the bandwidth of the sending and receiving can be 2E1 and 3E1 respectively);
- Provides the E1 connection-ship between local and remote system (accessed via GUI);
- E1 tributary signal loopback automatic detect and cut off; when some E1 signal is detected as looped back, it will be not employed for carrying payload temporarily, and when the loopback is broken, this E1 will resume to be used;
- Remote/local E1 loopback function will be convenient for E1 line (transmission system included) testing;
- Complete alarm which is selectable to be shown between local and remote. Historical & Current alarm databases;
- Single-board design with small dimension, 1U high and low power consumption;
- Support DC48V and AC 220V power supply;
- Support 0-50°C wide operating temperature range;
- Warranty:3years
Bộ chuyển đổi Ethernet 8E1 sang 4 với Quản lý VLAN và GUI
0 ₫
Model: HPC-8E1-4ETH
- Support GFP-F encapsulation recommendation G.7041;
- Support Virtual concatenation(VCAT) and Link Capacity Adjustment
- Scheme (LCAS) recommendation G.7042;
- Support Ethernet to n*E1 mapping recommendation G.7043;
- Support Ethernet to single E1 mapping recommendation G.8040;
- Bandwidth is increased without damaging the Ethernet data;
- E1s in the local and remote sides can be arranged arbitrarily, such as: the remote E1 port 1 can communicate with local E1 port;
- Supports bandwidth unbalanced usage – when some E1s cannot work properly (i.e. the bandwidth of the sending and receiving can be 2E1 and 3E1 respectively);
- Provides the E1 connection-ship between local and remote system (accessed via GUI);
- E1 tributary signal loopback automatic detect and cut off; when some E1 signal is detected as looped back, it will be not employed for carrying payload temporarily, and when the loopback is broken, this E1 will resume to be used;
- Remote/local E1 loopback function will be convenient for E1 line (transmission system included) testing;
- Complete alarm which is selectable to be shown between local and remote. Historical & Current alarm databases;
- Single-board design with small dimension, 1U high and low power consumption;
- Support DC48V and AC 220V power supply;
- Support 0-50°C wide operating temperature range;
- Warranty:3years
0 đánh giá cho Âm thanh 30 kênh E1 PCM Mux (19 inch)