MWF501-D is a rugged, industrial grade, multi-functional, Din-Rail RS-232/RS-485/RS-422 to fiber optic converter which can converts either full-duplex, half-duplex RS-485 or full-duplex RS-422 data up to 20km with single-mode cable. the device is fully plug-and-play, and support up to 255 fiber nodes.
MWF501-D can be configured as a daisy-chain or a self-healing/redundant ring fiber network, when configured as a ring fiber network, the built-in self-healing feature allows the data to be transmitted clockwise or counterclockwise; therefore, failure of any individual converter will not affect other devices located on the same fiber ring, making the entire data network more robust and reliable.
MWF501-D resistant to radio and electrical interference, such as EMI/RFI, transient surges and ground loops, built-in 600W surge protection, 15KV ESD and circuit protection, and it overcomes the limitations of conventional point-to-point fiber network and expands the serial data network in terms of distance, flexibility and reliability, widely used in various industrial controls, distributed data acquisition and other occasions, especially suitable for power system automation, traffic control and other departments.
Application
APPLICATION 1: DAISY-CHAIN FIBER LINKS
APPLICATION 2:SELF-HEALING/REDUNDANT RING FIBER LINKS
LED Indications
Connection
DIP Switch setting
| Master/Slave and 120-Ohm Settings | ||
 |
DIP SW 1 | ON: Master; OFF: Slave |
| DIP SW 2 | ON: 120-Ohm RS-485/422 End-of-Line Resistor Terminated
OFF: 120-Ohm RS-485/422 End-of-Line Resistor Removed |
|
| Power 1 & 2 Inputs | ||
| V1+/V1-: Power Supply 1 Input (12 to 48VDC)
V2+/V2-: Power Supply 2 Input (12 to 48VDC) |
||
| Power Alarm Output | ||
 |
Normally-Open Relay Alarm Output
(Maximum Load: 1A/24VDC) |
|
ĐẶC TRƯNG
- Support 1-port RS-232/RS-485/RS-422 to Fiber;
- Support Self-healing, Redundant Ring function;
- Supports up to 255 fiber nodes;
- Supports up to 128 nodes of RS-485/422 devices per fiber node;
- Plug-and Play(hot-pluggable);
- ST/SC/FC fiber optic connectors optional;
- Fiber optic range up to 20KM;
- 600W surge protection;
- 15kv static protection(ESD);
- Built-in selectable 120-Ohm end-of-line terminator for RS-485/RS-422 busses;
- Signal flow is automatically identified and transparently transmitted;
- Imported optical transceiver module to ensure the transmission distance;
- The baud rate adapts without changing the user protocol;
- Industrial design, aluminum housing;
- Support DIN-Rail installation;
- Support DC12-48V or AC/DC 220V;
- Working temperature range:-40~85°C;
- Warranty: 5years
THÔNG SỐ KỸ THUẬT
| Technical parameters | |
| Standard | Compliant with EIA RS-232, RS-485, RS-422 |
| Interface | Serial Port: Meet RS-232/RS-422/RS-485 Physical characteristics,7 ways Industrial terminal block |
| Optical interface: Single/multi-mode optional, SC/ST/FC connector optional | |
| Baud Rate | 300bps~115.2Kbps, rate adaptive signal |
| LED Indicator | |
| Power indicator | POW |
| Master/slave indicator | MAIN, SUB |
| Data transmission indicator | LOOPA/B, TXA/B, RXA/B, TXD, RX |
| Power | |
| Power Supply | DC12-48V, AC/DC 220V |
| Interface | Industrial terminal block |
| Power | <5W |
| Overload protection | Support |
| Lightning protection | 600W |
| Static protection | 15KV |
| Physical Characteristics | |
| Shell | Aluminum housing |
| Dimension | 144mm×33mm×97mm(H*D*W) |
| Weight | 460g |
| Transmission distance | |
| Serial port line | RS-232, 15m@9600bps |
| RS-422/RS-485, 1.2km@9600bps | |
| Multi-mode fiber | 1310nm, 2Km |
| Single mode fiber | 1310nm, 20Km,1550nm, 40km/60km/80km/100km |
| Working Environment | |
| Working Temp | -40~85°C |
| Storage Temp | -40~85°C |
| Relative Humidity | 5%~95% (no-condensation) |
| Warranty | |
| Warranty | 5 Years |
| Certification | CE, FCC, RoHS |
Products in the same series
| Model | Description | |
| MW50F | 1-port RS232/RS485/RS422 Over Fiber Modem, single fiber,20km, DC5-30V | |
| MW80F | 1-port RS232/RS485/RS422 Over Fiber Modem, single fiber,20km, DC5-30V or AC/DC 220V, Din-Rail | |
| MWF501-D |
|
Download
Tham khảo thêm các sản phẩm khác của Công ty TNHH Công Nghệ và Viễn Thông Hải Phong chúng tôi
Thêm một bình luận
Sản phẩm tương tự
MWISB04 UPCOM BỘ CHUYỂN ĐỔI SERIAL SANG ETHERNET CÔNG NGHIỆP
0 ₫
Model: MWISB04
- Supports 4 ports RS-232/485/422 to Ethernet Suport RTU Modbus Gateway
- Supports 1200 bps to 460800 bps . non-blocking line rates
- Support TCP Server, TCP Client, UDP mode
- CTS/RTS . hardware flow control support
- Support virtual search and serial device or modify parameters
- Provide device management library (Window DLL library)
- With the built-in Web server, its parameters can be modified by browsing the web
- Support DHCP, easy IP management and IP problem solving
- DNS support. It meets the need to access the data server through the domain name
- UDP mode supports dynamic destination addressing mode.
- Supports full-duplex, high-speed conversion, and converts most of the data at the same time without any pauses and no data loss.
- Built-in 2 KV power plus protection in RJ45
- High resistance to electromagnetic interference, with SECC outer shell for high electromagnetic interference protection.
Bộ chuyển đổi RS-232 sang RS-485/422 công nghiệp, cách ly 2500V, DC5V/DC9-30V
0 ₫
Model: UP-485-C8
- Support 1-port RS-232 to RS-485/RS-422 Converter;
- Industrial grade rugged ABS housing;
- Plug and play (hot-pluggable, data format auto-sensing and self-adjusting)
- Built-in 600W surge protection, 15kV static protection and circuit protection;
- Support 2500V photoelectric Isolation;
- External DC5V or DC9-30V, no port power from the RS-232 port is required;
- Supports high-speed serial data rates: 300 to 115,200bps;
- Supports up to 128 nodes of RS-485/422 devices;
- RS-485/RS-422 auto-detection, no jumper setting is required;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Built-in selectable 120Ω end-of-line terminator for system reliability;
- Direct DIN-Rail or wall/panel mounting without any unsecured brackets or adapters;
- Working temperature range:-40~85°C;
- Warranty:5years
Bộ chuyển đổi RS-232 sang RS-485/422 công nghiệp, 300bps～38,4Kbps, Cách ly quang điện 2500V, Cấp nguồn qua cổng
0 ₫
Model: UP-485-C4
- Support RS-232 to RS-485/RS-422;
- Port-powered, no external power is required;
- Plug and play (hot-pluggable);
- Built-in 600W surge protection, 15kV static protection and circuit protection;
- Supports high-speed serial data rates: 300 to 38.4Kbps;
- Support 2500V optical isolation;
- Supports up to 128 nodes of RS-485/RS-422 devices;
- External 5VDC regulated power is acceptable if the port power is insufficient;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Built-in selectable 120Ω end-of-line terminator for system reliability and easy installation;
- Working temperature range:-40~85°C;
- Warranty:5years
Bộ chuyển đổi RS-232 sang RS-485/RS422 công nghiệp, 300bps～115.2Kbps, chạy bằng cổng
0 ₫
Model: UP-485-C3
- Support commercial type RS-232 to RS-485;
- Port-powered, no external power is required;
- Plug and play (hot-pluggable);
- Built-in 600W surge protection, 15kV static protection and circuit protection;
- Supports high-speed serial data rates: 300 to 115,200bps;
- Supports up to 128 nodes of RS-485 devices;
- External 5VDC regulated power is acceptable if the port power is insufficient;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Built-in selectable 120Ω end-of-line terminator for system reliability and easy installation;
- Working temperature range:-40~85°C;
- Warranty:5years
Bộ chuyển đổi RS-232 sang RS-485 công nghiệp, 300bps～115.2Kbps, chạy bằng cổng
0 ₫
Model: UP-485-C2
- Support commercial type RS-232 to RS-485;
- Port-powered, no external power is required;
- Plug and play (hot-pluggable);
- Built-in 600W surge protection, 15kV static protection and circuit protection;
- Supports high-speed serial data rates: 300 to 115,200bps;
- Supports up to 128 nodes of RS-485 devices;
- External 5VDC regulated power is acceptable if the port power is insufficient;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Built-in selectable 120Ω end-of-line terminator for system reliability and easy installation;
- Working temperature range:-40~85°C;
- Warranty:5years
Bộ chuyển đổi RS-232 sang RS-485 thương mại, 300bps～115.2Kbps, chạy bằng cổng
0 ₫
Model: UP-485-C1
- Support commercial type RS-232 to RS-485;
- Port-powered, no external power is required;
- Plug and play (hot-pluggable);
- Built-in 600W surge protection;
- Supports high-speed serial data rates: 300 to 115,200bps;
- Supports up to 128 nodes of RS-485 devices;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Working temperature range:-20~70°C;
- Warranty:3years
0 đánh giá cho Bộ chuyển đổi cáp quang 1 cổng RS232/RS485/RS422, Vòng dự phòng/tự phục hồi