The UP-485-C8 is a rugged, industrial-grade, high-speed (300 to 115,200bps), 2500V photoelectric isolated RS-232 to RS-485 / RS-422 converter, It can converter a RS232 serial port signal to two wires high speed half duplex RS485 or a four wires full duplex RS422 signal. This product features opto-isolation circuitry, which effectively protects your RS-232 devices from ground loops, noise problems, transient surges, remote lightning and spikes. The unit supports serial data rates up to 115,200bps and features data format auto-sensing and self-adjusting, no DIP switch or jumpers are required.
UP-485-C8 resistant to radio and electrical interference, such as EMI/RFI, transient surges and ground loops, built-in 600W surge protection, 15KV ESD and circuit protection, and it is designed to realize the bidirectional mutual conversion between RS-232 signal and RS-422/485 signal, widely used in various industrial controls, distributed data acquisition, power system automation, traffic control and other occasions.
ĐẶC TRƯNG
- Support 1-port RS-232 to RS-485/RS-422 Converter;
- Industrial grade rugged ABS housing;
- Plug and play (hot-pluggable, data format auto-sensing and self-adjusting)
- Built-in 600W surge protection, 15kV static protection and circuit protection;
- Support 2500V photoelectric Isolation;
- External DC5V or DC9-30V, no port power from the RS-232 port is required;
- Supports high-speed serial data rates: 300 to 115,200bps;
- Supports up to 128 nodes of RS-485/422 devices;
- RS-485/RS-422 auto-detection, no jumper setting is required;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Built-in selectable 120Ω end-of-line terminator for system reliability;
- Direct DIN-Rail or wall/panel mounting without any unsecured brackets or adapters;
- Working temperature range:-40~85°C;
- Warranty:5years
THÔNG SỐ KỸ THUẬT
| Technical parameters | |
| Standard | Compliant with EIA RS-232, RS-485, RS-422 |
| Interface | RS-232: DB9 interface |
| RS-485/RS-422: Industrial terminal block | |
| Baud Rate | 300bps~115.2Kbps, rate adaptive signal |
| LED Indicator | |
| Power indicator | POW(Red): Always light up when the power is connected properly |
| Serial port Indicator | ︾(Green): Flashes when data is being sent or received
︽(Yellow): Flashes when data is being sent or received |
| Power | |
| Power Supply | External supply DC5V or DC 9~30V |
| Interface | DB9 interface, industrial terminal block |
| Lightning protection | 600W |
| Static protection | 15KV |
| Optical Isolation | 2500Vrms (AC, 1 min) |
| Physical Characteristics | |
| Shell | DIN rail ABS housing |
| Dimension | 117mm×34mm×72mm (H*D*W) |
| Weight | 100g |
| Transmission distance | |
| Serial port line | RS-232, 15m@9600bps |
| RS-422/RS-485, 1.2km@9600bps | |
| Working Environment | |
| Working Temp | -40~85°C |
| Storage Temp | -40~85°C |
| Relative Humidity | 5%~95% (no-condensation) |
| Warranty | |
| Warranty | 5 Years |
| Certification | CE, FCC, RoHS |
| Model | Description | ||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
Download
Tham khảo thêm các sản phẩm khác của Công ty TNHH Công Nghệ và Viễn Thông Hải Phong chúng tôi
Thêm một bình luận
Sản phẩm tương tự
MWISB04 UPCOM BỘ CHUYỂN ĐỔI SERIAL SANG ETHERNET CÔNG NGHIỆP
0 ₫
Model: MWISB04
- Supports 4 ports RS-232/485/422 to Ethernet Suport RTU Modbus Gateway
- Supports 1200 bps to 460800 bps . non-blocking line rates
- Support TCP Server, TCP Client, UDP mode
- CTS/RTS . hardware flow control support
- Support virtual search and serial device or modify parameters
- Provide device management library (Window DLL library)
- With the built-in Web server, its parameters can be modified by browsing the web
- Support DHCP, easy IP management and IP problem solving
- DNS support. It meets the need to access the data server through the domain name
- UDP mode supports dynamic destination addressing mode.
- Supports full-duplex, high-speed conversion, and converts most of the data at the same time without any pauses and no data loss.
- Built-in 2 KV power plus protection in RJ45
- High resistance to electromagnetic interference, with SECC outer shell for high electromagnetic interference protection.
Bộ chuyển đổi RS-232 sang RS-485/422 công nghiệp, 300bps～38,4Kbps, Cách ly quang điện 2500V, Cấp nguồn qua cổng
0 ₫
Model: UP-485-C4
- Support RS-232 to RS-485/RS-422;
- Port-powered, no external power is required;
- Plug and play (hot-pluggable);
- Built-in 600W surge protection, 15kV static protection and circuit protection;
- Supports high-speed serial data rates: 300 to 38.4Kbps;
- Support 2500V optical isolation;
- Supports up to 128 nodes of RS-485/RS-422 devices;
- External 5VDC regulated power is acceptable if the port power is insufficient;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Built-in selectable 120Ω end-of-line terminator for system reliability and easy installation;
- Working temperature range:-40~85°C;
- Warranty:5years
Bộ chuyển đổi RS-232 sang RS-485/RS422 công nghiệp, 300bps～115.2Kbps, chạy bằng cổng
0 ₫
Model: UP-485-C3
- Support commercial type RS-232 to RS-485;
- Port-powered, no external power is required;
- Plug and play (hot-pluggable);
- Built-in 600W surge protection, 15kV static protection and circuit protection;
- Supports high-speed serial data rates: 300 to 115,200bps;
- Supports up to 128 nodes of RS-485 devices;
- External 5VDC regulated power is acceptable if the port power is insufficient;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Built-in selectable 120Ω end-of-line terminator for system reliability and easy installation;
- Working temperature range:-40~85°C;
- Warranty:5years
Bộ chuyển đổi RS-232 sang RS-485 công nghiệp, 300bps～115.2Kbps, chạy bằng cổng
0 ₫
Model: UP-485-C2
- Support commercial type RS-232 to RS-485;
- Port-powered, no external power is required;
- Plug and play (hot-pluggable);
- Built-in 600W surge protection, 15kV static protection and circuit protection;
- Supports high-speed serial data rates: 300 to 115,200bps;
- Supports up to 128 nodes of RS-485 devices;
- External 5VDC regulated power is acceptable if the port power is insufficient;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Built-in selectable 120Ω end-of-line terminator for system reliability and easy installation;
- Working temperature range:-40~85°C;
- Warranty:5years
Bộ chuyển đổi RS-232 sang RS-485 thương mại, 300bps～115.2Kbps, chạy bằng cổng
0 ₫
Model: UP-485-C1
- Support commercial type RS-232 to RS-485;
- Port-powered, no external power is required;
- Plug and play (hot-pluggable);
- Built-in 600W surge protection;
- Supports high-speed serial data rates: 300 to 115,200bps;
- Supports up to 128 nodes of RS-485 devices;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Working temperature range:-20~70°C;
- Warranty:3years
Bộ chuyển đổi cáp quang 1 cổng RS232/RS485/RS422, Vòng dự phòng/tự phục hồi
0 ₫
Model: MWF501-D
- Support 1-port RS-232/RS-485/RS-422 to Fiber;
- Support Self-healing, Redundant Ring function;
- Supports up to 255 fiber nodes;
- Supports up to 128 nodes of RS-485/422 devices per fiber node;
- Plug-and Play(hot-pluggable);
- ST/SC/FC fiber optic connectors optional;
- Fiber optic range up to 20KM;
- 600W surge protection;
- 15kv static protection(ESD);
- Built-in selectable 120-Ohm end-of-line terminator for RS-485/RS-422 busses;
- Signal flow is automatically identified and transparently transmitted;
- Imported optical transceiver module to ensure the transmission distance;
- The baud rate adapts without changing the user protocol;
- Industrial design, aluminum housing;
- Support DIN-Rail installation;
- Support DC12-48V or AC/DC 220V;
- Working temperature range:-40~85°C;
- Warranty: 5years
0 đánh giá cho Bộ chuyển đổi RS-232 sang RS-485/422 công nghiệp, cách ly 2500V, DC5V/DC9-30V