MW50F is a rugged, industrial grade, multi-functional RS-232/RS-485/RS-422 to single-mode fiber optic converter which can converts either full-duplex, half-duplex RS-485 or full-duplex RS-422 data up to 20km. the device is fully plug-and-play, no need for software drivers and enables the serial transmit and receive data signals when data is present.
MW50F resistant to radio and electrical interference, such as EMI/RFI, transient surges and ground loops, built-in 600W surge protection, 15KV ESD and circuit protection, and it overcomes the limitations of conventional point-to-point fiber network and expands the serial data network in terms of distance, flexibility and reliability, widely used in various industrial controls, distributed data acquisition and other occasions, especially suitable for power system automation, traffic control and other departments.
MW50F serial to fiber converter support three types of serial port, RS-232/485/422, including RS232 to fiber converter, RS422 to fiber converter and RS485 to fiber converter, Users can choose any type to connect local terminal and remote terminal. but can not compatible with these three modes at the same time.
Diversity Serial Conversion
RS232/RS422/RS485 port can be mixed and matched which means you can have same data type on both side, or one side RS232 and the other side RS485 or RS422, etc.
RS232 to Fiber Optic Converter
RS232 to Fiber Optic Converter convert full-duplex RS-232 electrical signal into optical fiber signals by using a single mode or multi-mode fiber optic cable.
RS422/RS485 to Fiber Optic Converter
RS422/RS485 to Fiber Optic Converter adopts point-to-multipoint connection for transmitting and converting full/half-duplex signals within a fiber optics cable, it has the advantages of wide bandwidth, anti-EMI/RFI interference, and data transmission safety. RS485 supports 128 nodes and RS422 supports 64 nodes.
PIN setting
RS232 interface often use DB9 connector, When connect to RS232 port, pin 2 is RX (receive signal), pin 3 is TX (transmit signal), pin 5 is GND (Ground).
RS485/RS422 connection using the terminal block, for RS485 port, pin 1 A (485+), pin 2 is B (485-),pin 5 is GND(Ground), on the other hand, for RS422 connection, pin 1 is T+, pin 2 is T-, pin 3 is R+, pin 4 is R-, pin 5 is GND. When RS-485(or RS-422) is working, our suggestion is connecting each GND between serial to fiber converters with Equipment RS485 port. Because RS485(or RS422) communication voltage is less than 12V.
Power supply
MW50F supports 2types power supply input. One is DC5-36V external power adapter, DC round-head, inner ring is the positive pole, outer ring is the negative pole. the other one is 2-pin terminal blocks and supports 5~36VDC power supply input.
Note: Pay attention to the power polarity, wrong connection may damage the equipment.
LED Indicator
Optical Transceivers
Serial to fiber converters are used in pairs, often use single-fiber, single-mode transmit for long-distance transmission that can reach 20 km, and multimode transmission can reach 2km. please click to know the difference between single mode and multimode. UPCOM adopt high quality 1*9 fixed module, SC/ST/FC connector optional, strong anti-interference ability, stable transmission.
ĐẶC TRƯNG
- Support 1-port RS-232/RS-485/RS-422 to Fiber;
- Support EIA RS-232, RS-485, RS-422 Standard;
- Plug-and Play(hot-pluggable);
- ST/SC/FC fiber optic connectors optional;
- Fiber optic range up to 20KM;
- 600W surge protection;
- 15kv static protection(ESD);
- Signal flow is automatically identified and transparently transmitted;
- Imported optical transceiver module to ensure the transmission distance;
- The baud rate adapts without changing the user protocol;
- Industrial design, aluminum housing;
- Support DIN-Rail Mounting or Wall Mounting installation;
- Working temperature range:-40~85°C;
- Warranty: 5years
THÔNG SỐ KỸ THUẬT
| Technical parameters | |
| Standard | Compliant with EIA RS-232, RS-485, RS-422 |
| Interface | Serial Port: Meet RS-232/RS-422/RS-485 Physical characteristics,Industrial terminal block |
| Optical interface: Single/multi-mode optional, SC/ST/FC connector optional | |
| Baud Rate | 300bps~115.2Kbps, rate adaptive signal |
| LED Indicator | |
| Power indicator | POW |
| Data transmission indicator | TX, RX |
| Power | |
| Power Supply | DC5~30V |
| Interface | BNC coaxial input,industrial terminal block |
| Power | <1W |
| Overload protection | Support |
| Surge protection | 600W |
| Static protection | 15KV |
| Physical Characteristics | |
| Shell | Aluminum housing |
| Dimension | 78mm×25mm×85mm(W*H*D) |
| Weight | 400g |
| Transmission distance | |
| Serial port line | RS-232, 15m@9600bps |
| RS-422/RS-485, 1.2km@9600bps | |
| Multi-mode fiber | 1310nm, 2Km |
| Single mode fiber | 1310nm, 20Km,1550nm, 40km/60km/80km/100km |
| Working Environment | |
| Working Temp | -40~85°C |
| Storage Temp | -40~85°C |
| Relative Humidity | 5%~95% (no-condensation) |
| Warranty | |
| Warranty | 5 Years |
| Certification | CE, FCC, RoHS |
Products in the same series
| Model | Description | |
| MW50F | 1-port RS232/RS485/RS422 Over Fiber Modem, single fiber,20km, DC5-30V | |
| MW80F | 1-port RS232/RS485/RS422 Over Fiber Modem, single fiber,20km, DC5-30V or AC/DC 220V, Din-Rail | |
| MWF501-D |
|
Download
Tham khảo thêm các sản phẩm khác của Công ty TNHH Công Nghệ và Viễn Thông Hải Phong chúng tôi
Thêm một bình luận
Sản phẩm tương tự
MWISB04 UPCOM BỘ CHUYỂN ĐỔI SERIAL SANG ETHERNET CÔNG NGHIỆP
Model: MWISB04
- Supports 4 ports RS-232/485/422 to Ethernet Suport RTU Modbus Gateway
- Supports 1200 bps to 460800 bps . non-blocking line rates
- Support TCP Server, TCP Client, UDP mode
- CTS/RTS . hardware flow control support
- Support virtual search and serial device or modify parameters
- Provide device management library (Window DLL library)
- With the built-in Web server, its parameters can be modified by browsing the web
- Support DHCP, easy IP management and IP problem solving
- DNS support. It meets the need to access the data server through the domain name
- UDP mode supports dynamic destination addressing mode.
- Supports full-duplex, high-speed conversion, and converts most of the data at the same time without any pauses and no data loss.
- Built-in 2 KV power plus protection in RJ45
- High resistance to electromagnetic interference, with SECC outer shell for high electromagnetic interference protection.
Bộ chuyển đổi RS-232 sang RS-485/422 công nghiệp, cách ly 2500V, DC5V/DC9-30V
Model: UP-485-C8
- Support 1-port RS-232 to RS-485/RS-422 Converter;
- Industrial grade rugged ABS housing;
- Plug and play (hot-pluggable, data format auto-sensing and self-adjusting)
- Built-in 600W surge protection, 15kV static protection and circuit protection;
- Support 2500V photoelectric Isolation;
- External DC5V or DC9-30V, no port power from the RS-232 port is required;
- Supports high-speed serial data rates: 300 to 115,200bps;
- Supports up to 128 nodes of RS-485/422 devices;
- RS-485/RS-422 auto-detection, no jumper setting is required;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Built-in selectable 120Ω end-of-line terminator for system reliability;
- Direct DIN-Rail or wall/panel mounting without any unsecured brackets or adapters;
- Working temperature range:-40~85°C;
- Warranty:5years
Bộ chuyển đổi RS-232 sang RS-485/422 công nghiệp, 300bps～38,4Kbps, Cách ly quang điện 2500V, Cấp nguồn qua cổng
Model: UP-485-C4
- Support RS-232 to RS-485/RS-422;
- Port-powered, no external power is required;
- Plug and play (hot-pluggable);
- Built-in 600W surge protection, 15kV static protection and circuit protection;
- Supports high-speed serial data rates: 300 to 38.4Kbps;
- Support 2500V optical isolation;
- Supports up to 128 nodes of RS-485/RS-422 devices;
- External 5VDC regulated power is acceptable if the port power is insufficient;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Built-in selectable 120Ω end-of-line terminator for system reliability and easy installation;
- Working temperature range:-40~85°C;
- Warranty:5years
Bộ chuyển đổi RS-232 sang RS-485/RS422 công nghiệp, 300bps～115.2Kbps, chạy bằng cổng
Model: UP-485-C3
- Support commercial type RS-232 to RS-485;
- Port-powered, no external power is required;
- Plug and play (hot-pluggable);
- Built-in 600W surge protection, 15kV static protection and circuit protection;
- Supports high-speed serial data rates: 300 to 115,200bps;
- Supports up to 128 nodes of RS-485 devices;
- External 5VDC regulated power is acceptable if the port power is insufficient;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Built-in selectable 120Ω end-of-line terminator for system reliability and easy installation;
- Working temperature range:-40~85°C;
- Warranty:5years
Bộ chuyển đổi RS-232 sang RS-485 công nghiệp, 300bps～115.2Kbps, chạy bằng cổng
Model: UP-485-C2
- Support commercial type RS-232 to RS-485;
- Port-powered, no external power is required;
- Plug and play (hot-pluggable);
- Built-in 600W surge protection, 15kV static protection and circuit protection;
- Supports high-speed serial data rates: 300 to 115,200bps;
- Supports up to 128 nodes of RS-485 devices;
- External 5VDC regulated power is acceptable if the port power is insufficient;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Built-in selectable 120Ω end-of-line terminator for system reliability and easy installation;
- Working temperature range:-40~85°C;
- Warranty:5years
Bộ chuyển đổi RS-232 sang RS-485 thương mại, 300bps～115.2Kbps, chạy bằng cổng
Model: UP-485-C1
- Support commercial type RS-232 to RS-485;
- Port-powered, no external power is required;
- Plug and play (hot-pluggable);
- Built-in 600W surge protection;
- Supports high-speed serial data rates: 300 to 115,200bps;
- Supports up to 128 nodes of RS-485 devices;
- Data direction auto-turnaround, no software drivers or flow control is required;
- Working temperature range:-20~70°C;
- Warranty:3years
0 đánh giá cho Bộ chuyển đổi quang 1 cổng RS232/RS485/RS422